حلقة 2 مسلسل Bull الموسم الثالث الحلقة 2 2018 HDTv مسلسل Bull الموسم الثالث الحلقة 2 جريمة مشاهدة وتحميل مسلسل الجريمة والدراما Bull S03 HD الموسم الثالث مترجم اون لاين وتحميل مباشر | BlacKkKlansman (2018) RATING 0.0 / 10 QUALITY | Doujin Work

Electron bombarded semiconductor devices

Electron bombarded semiconductor devices

World Abstracts on Microelectronics and Reliability Transactions on Pans, Hybrids and Packaging. PltP-10, 251 (1974). Results are discussed of an eva...

127KB Sizes 0 Downloads 86 Views

World Abstracts on Microelectronics and Reliability

Transactions on Pans, Hybrids and Packaging. PltP-10, 251 (1974). Results are discussed of an evaluation program for polymer materials considered for applications as protective coatings on hybrid microcircuits. The general organization of the program was in terms of seven potential mechanisms by which coatings could fail to provide protection. Emphasis is on describing those six tests which developed differences in material behavior considered to be significant in terms of the general application. Three involved electrical performance of the films alone or in conjunction with hybrid circuit elements, two dealt with mechanical properties, and one with chemically related behavior. It is suggested that the tests could be used in selecting promising candidates for particular applications which relate to the test conditions or in understanding some failure modes which could be expected in complex hybrid microcircuit assemblies. A brief review is given of those tests which were not considered to develop distinctions between materials. As a point of exception, the role of organic coatings on bare semiconductor device surfaces was not investigated. 9. E L E C T R O N ,

ION

A few examples of applying laser microspectral analysis in semiconductor engineering. GERHARD MOHAPUT and GUDRUN PATZMANN. J E N A Review 4/1974 p. 252. A number of examples demonstrate that the laser microspectral analysis can be employed to advantage for the qualitative local analysis of various materials required in semiconductor engineering. After a thorough examination of the effect of uncontrolled laser pulses on monocrystalline gallium arsenide, a report is given on the determination of silicon in monocrystalline gallium arsenide with the aid of the laser microspectral analysis. For the calibration of the method intended for a local analysis in the range of the trace, a homogeneous silicon dioxide layer on gallium arsenide was employed. The result achieved displayed a detection limit of 2.3 ng silicon. The relative standard deviation in the range from 1 to 50 ng silicon lies at 45%.

Ion implantation boosts threshold of JFET breakdown. Electronics November 28, 1974. p. 39. Ion implantation has been a production tool at most major semiconductor manufacturers' facilities for some years. But only recently has it been applied to j unction field-effect transistors fabricated in a monolithic IC array. That's at National Semiconductor Corp., Santa Clara, Calif., and the results are a seven to eight times boost in the JFET breakdown thresholds over the levels of most other monolithic junction field-effect devices on the market.

Metal-semiconductor contacts prepared by ion implantation. W. ROSINSKI and T. KOMICZ. Electron Tech. 7, (Warsaw). 1/2 1974. p. 13. The paper presents a method of preparing ion implanted contacts to GaAs. The contacts exhibit linear characteristics and low resistivity per square. The results obtained for n- and p-type GaAs are described.

Computer controlled electron-beam projection mask aligner. W. R. LIVESAY. Solid State Tech. July 1974. p. 21. Photolithographic processes in microelectronics have been pushed to their resolution limits and, as a result, new techniques have been proposed both in electron-beam microfabrication and X-ray lithography. However, these new techniques, though demonstrated on an R and D scale, are not readily adaptable to a production process. An electron-beam projection system is described which has been specifically built for production and enables submicron structures to be defined over a large image format (threeinch diameter). The electron projection system described

285

*Conduction mechanisms in thick f t ~ microcircuit& Semiannual technical report. 1 Jul-31 Dec. 1973. R. W. VEST. Perdue Research Foundation, Lafayette, Ind. 45 (1974). The primary thrust of the experimental program is to relate electrical properties of the thick films to the materials properties and processing conditions through microstructure. The materials properties to be correlated are: resistivity, temperature coefficient of resistivity, coefficient of thermal expansion, interracial energy, particle shape, size and size distribution, and chemical reactivity with other constituents. The processing conditions to be correlated are time, temperature and atmosphere during firing. The specific objectives of the program are to determine the dominant sintering mechanisms responsible for microstructure development and establish the relative importance of the various properties of the ingredient materials, determine the dominant mechanisms limiting electrical charge transport, and establish the relative importance of the various properties of the ingredient materials and develop phenomenological models to interrelate the various materials properties with systems performance. AND

LASER

BEAMS

features computer controlled mask-to-wafer alignment and an automatic handling system for 'processing wafers in vacuum.

Electron bombarded semiconductor devices. ARIS SILZARS, DAVID J. BATES and AARON BALLONOFF. Proc. IEEE Vol. 62. No. 8. August 1974. p. 1119. The first electron bombarded semiconductor (EBS) devices have recently appeared on the market. These devices have already demonstrated that EBS has considerable promise as an important new electron device for power amplification and control EBS devices are described with particular emphasis on power devices. The basic EBS principle, some of the analysis used in device design, general considerations in designing the various elements of the device, overall device design, semiconductor processing, and reliability considerations are discussed. Predictions of general directions for future work are made. Some historical information is also presented as well as a brief comparison with other competing power devices.

Electron irradiation damage in silicon containing carbon and diffused ~sO. F. A. ABOU-EL-FOTOUHand R. C. NEWMAN. Solid State Commun. Vol. 15. 1974. p. 1409. Silicon crystals have been diffused with 180, irradiated with 2 MeV electrons at room temperature and then annealed up to 400°C. Infrared absorption measurements of the localized vibrational modes of various defects have been made at each stage.

Laser trimming of thick film resistors. A. F. DYSON and A. J. CABLE. Electrocomponent Science and Technology. 1, p. 51 (1974). Recent papers and conferences have indicated very strongly that thick film screen processing has become a routine production item, with the specifications and economics being considered in detail. The existing resistor and conduction materials and processes have become well documented and are well known on an international scale. This paper reviews the present situation and, in particular, I discusses the effects of a recently-introduced production tool--the laser trimmer.

Ion-implanted semiconductor devices. DON H. LEE and JAMES W. MAYER. Proc. IEEE. 62 (9) September, 1974. p. 1241. Ion implantation is finding increased usage in device fabrication owing to precise control and reproducibility of the charge and depth distribution of the implanted-dopant